Abus SHSG10000 설치 및 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} Abus SHSG10000에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus SHSG10000 11 페이지. Z-wave siren
Abus SHSG10000에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)

페이지 인쇄

Label

Networking-Button

Loudspeaker

Power Plug

Flashing Light

3.3

Operating Principle

The SHSG10000 was developed for use in home automation systems that use the Z-

Wave wireless standard. The siren serves as an alarm device and is equipped with a

loud siren (up to 95 dB) and a red LED flash. Thanks to the integrated backup battery,

the siren can still alert for up to 5 minutes or operate in standby mode for approx. 4

hours, even when removed from the power supply.

3.4

Performance features

The ABUS Z-Wave SHSG10000...:

... is an radio siren with integrated backup battery

... is Z-Wave PLUS compatible & certified

...supports the Z-Wave S2 Standard (Security 2)

... alarms loudly by the integrated 95dB siren

... has a red LED flash which lights up in case of alarm

... was developed for indoor use

3.5

Use in systems of different manufacturers

Communication is via the Z-Wave EU frequency (868.42 Mhz). You can integrate the

device into any Z-Wave network with a certified Z-Wave gateway, regardless of

manufacturer. All non-battery powered nodes in the network act as repeater to increase

the durability of the network.

4. Overview of functions

4.1. Inclusion / Add Device

Comment

For inclusion / exclusion of the siren in a Z-Wave Gateway,

factory reset

In case of an alarm, a 95dB loud signal tone sounds here

For connection in the socket

In case of alarm the ring lights up red

Plug the device into a socket

English