Audioplex STEALTH IR HW 설치 매뉴얼

{카테고리_이름} Audioplex STEALTH IR HW에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audioplex STEALTH IR HW 2 페이지. Remote receiver and processor
Audioplex STEALTH IR HW에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지)

페이지 인쇄

Package:

Mounting:

Remotes:

Range:

Acceptance angle:

Power:

Dimensions:

Your Stealth IR HW(tm) is a compact unit that is designed to act as a remote receiver and

processor of infrared signals. This sensor will receive signals from remote controllers and send

these signals to a remote repeater.

CAUTION: Take care to make sure that the Stealth IR HW(TM) installation is NOT IN THE

LINE OF SIGHT OR REFLECTION with the repeater. If radiation from the repeater is picked up

by this sensor, a feedback situation is created which will result in instability and unreliable

operation. Undesirable reflection can occur off of light colored walls, windows, mirrors, and even

shiny wood finishes! Follow the wiring diagram carefully(see back of this page for wiring

diagrams). NOTE: make all connections and check carefully prior to supplying power to the

unit! Please call if you have any questions about your installation.

Your AUDIOPLEX TECHNOLOGY(tm) Stealth IR HW(TM) is covered by a Lifetime warranty

against defects in workmanship and materials. Any defects will be remedied without charge for

labor or parts.

Damage incurred by shipping or accident is not considered to be a defect, and not covered

by this warranty. AUDIOPLEX TECHNOLOGY(tm) is not responsible for defective operation

caused by abuse or by modification or service by an unauthorized person or agency.

The unit must be properly installed and operated according to instructions for the

warranty to apply. Any necessary servicing must be done by AUDIOPLEX TECHNOLOGY(tm). The

products must be returned expences prepaid, with written authorization from the company. The

unit must be shipped with the proof of purchase and in the original carton and packing material to

avoid damage.

INSTALLATION MANUAL

TECHNOLOGY

STEALTH IR HW

Used as a remote receiver and processor

SPECIFICATIONS:

Includes: Stealth IR sensor (6 foot lead) and control unit.

Adhesive backing (control unit), adhesive backing (sensor)

Will handle almost all standard remote controllers (Note: does NOT work

with B & O equipment, which requires a proprietary confirmation talk-back

function).

110 feet indoors, 15 to 20 feet in direct sunlight.

+ or - 55 degrees off center axis.

12 VDC @ 500 mA (unregulated)

2.1" x 1.5" x 1.35"

INSTALLATION:

WARRANTY

(Patent Pending)

2002 - 10/29/02