Dantel B11-46022-20 설치 및 운영 매뉴얼 - 페이지 2

{카테고리_이름} Dantel B11-46022-20에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dantel B11-46022-20 8 페이지. Multiple alarm combiner

ORDERING INFORMATION

NOTE: This section lists the different options available for this product. To order any of the avail-

able options, contact Dantel Inside Sales through our toll-free number, 1-800-432-6835.

OPTION NUMBER

B11-46022-20

AGE

FEATURES

Multiple Alarm Combiner

he 46022-20 Multiple Alarm Combiner (MAC) interfaces

data signals between the remote components of Dantel's

460 Alarm and Control System (ACS) and the data port of the

46020 Multiple Alarm Processor (MAP). It may be located

with the MAP or at the remote.

The 46022-20 MAC serves as a mounting for the 49008, 49013,

or 49029 communications subassembly. The data communica-

tions modems and current loops mounted on the MAC accom-

plish the interfacing.

The MAC is a plug-in printed circuit module that fits into any

Dantel 400-type or similar equipment housing. It operates on

-21 to -56 VDC input power.

he circuit consists of signal isolation diodes and a power

supply. The power supply uses -21 to -56 VDC input power

to provide ±12 VDC and +5 VDC to the subassembly. It also

supplies the following to the edge connector for off-board use:

♦

+12 VDC (pin 47)

♦

-12 VDC (pin 49)

♦

+5 VDC (pin 45)

Refer to Fig. 1 for an illustration of the functional schematic.

46022-20-0398 <90-00066>