Audioplex HD-100 운영 매뉴얼 - 페이지 4

{카테고리_이름} Audioplex HD-100에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audioplex HD-100 17 페이지. Reference amplifier

REFERENCE AMPLIFIER

Unpacking

Please take a few minutes to read this manual to familiarize yourself with important information regarding

installation, product features, and operation.

As with most electronic devices, ORIGINAL PACKAGING (OR EQUAL) IS REQUIRED in the unlikely event that

the product needs to be returned for servicing.

1. Do not connect the AC power until step 6. The POWER switch should be in the OFF position.

2. Adjust both of the LEVEL controls to the fully attenuated position (turn counter-clockwise).

3. Connect an appropriate line level input signal to either the balanced XLR or the balanced 1/4" TRS (Tip-Ring-

Sleeve) connector marked INPUTS.

4. Move the MODE selector to the desired position. The Stereo position is the most common.

5. Connect the OUTPUTS to the speaker load according to the mode of operation determined in the previous step.

6. With the power switch in the OFF position, plug in the supplied Universal AC power cord to the product and

an appropriate AC source.

7. Depress the power switch to the ON position. The power switch will illuminate.

8. The product is ready for operation. Slowly increase the LEVEL control to the desired operating level. Avoid

illuminating the PEAK indicator and do not apply too much power to the speakers.

9. Operate the product and the system in a manner which DOES NOT illuminate the PEAK warning indicator.

HD-100