Dantherm CDF 70 서비스 키트 지침 - 페이지 2

{카테고리_이름} Dantherm CDF 70에 대한 서비스 키트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dantherm CDF 70 12 페이지. Replacing rh/t sensor
Dantherm CDF 70에 대해서도 마찬가지입니다: 빠른 설치 (12 페이지), 매뉴얼 (6 페이지)

페이지 인쇄

Unpack the unit and remove the front.

Remove the PPI filter and replace with new as

per partslist.

The new PPI filter must be right up against both

ends of the cabinet.

Make sure that the hole is furthest away from the

front as shown.

Note: For CDP/CDF 40 and 50 the filters

must be cut according to this illustra-

tion.

Make sure there is a bracket on the condenser

coil.

If not, mount the small aluminium bracket and

the

white plastic copper tube holder.

The bracket must be fixed onto the side panel

with the self-tapping screws.

Fix the capacitor with a cable tie strip as shown.

Instructions

200mm

130mm

0mm

1237mm

1447mm