AudioQuest NIAGARA 5000UK 소유자 매뉴얼 - 페이지 12

{카테고리_이름} AudioQuest NIAGARA 5000UK에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioQuest NIAGARA 5000UK 17 페이지. Noise-dissipation system
AudioQuest NIAGARA 5000UK에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Specifications

Surge Suppression:

Extreme Voltage Shutdown

Voltage:

Level-X Ultra-Linear Common-

Mode Noise Dissipation:

Level-X Ultra-Linear Transverse-

Mode Noise Dissipation:

Input Current Maximum Capacity:

11 AC Ground-Noise Dissipated

Outlets in 5 Isolated Groups:

Power Consumption:

Dimensions:

Weight:

Non-sacrificial (nothing to damage with repeated 6000V/3000A

input surge tests, which is the maximum that can survive through a

building's AC electrical panel).

275VAC (will activate the main high-current relay to open within less

than 0.25 second; automatically resets once the incoming power is

within a safe range).

In excess of 30dB from 20kHz to 100MHz, linearized for dynamic

(rising) line impedance with frequency (source) and 10- to 50-ohm

load, system current dependent.

In excess of 24dB from 3kHz to 1GHz, linearized for dynamic (rising)

line impedance with frequency (source) and 10- to 50-ohm load,

system current dependent.

13 amps RMS (total).

3 High-Current/Transient Power Correction outlets for on-demand

current to variable-current equipment (amplifiers). 8 Level-X Ultra-

Linear Filtered AC outlets.

Typically, less than 0.25 amps at 240VAC input, or with the power

correction switched to Standby setting.

(This is dependent on a reactive vector load. For more info, see "Operation

and Continuous Use: Rear-Panel Power Correction Switch | Niagara

5000UK Current Draw.")

445mm W x 133mm H x 437mm D (3-RU rack-mounting ears, optional)

18kg.