Constellation Argo 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Constellation Argo에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Constellation Argo 20 페이지.

4. Headphone output

The Argo offers a single headphone output on a 1/4-inch/6.2mm jack. To activate this output (and mute the

speaker outputs), you must use the front-panel controls. The Argo's headphone amplifier has enough power to

drive any dynamic or planar magnetic headphones. If your headphones have a 1/8-inch/3.5mm plug, use a

1/8-inch to 1/4-inch adapter. Many headphones come with the adapter.

5. XLR outputs

The two inner XLR connections on the rear of the Argo are outputs. These can be connected to a larger, more

power amplifier such as the Constellation Audio Hercules or Centaur. They can also be connected to a system

in a second room, or to a powered subwoofer.

Be sure to match the output to the correct channel on your amp. As you are looking at the back of the Argo, the

output on the left side is for the right channel, and the output on the right side is for the left channel.

To remove an XLR plug, push on the tab on the connector body and pull the plug out.