Constellation audio PERSEUS 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Constellation audio PERSEUS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Constellation audio PERSEUS 19 페이지.

7. Chassis ground

The chassis ground terminal is one of two ground terminals provided on the Perseus. Two separate grounds

provide more grounding options and will allow you to reduce hum to an absolute minimum. Typically the

chassis ground will be connected to the ground terminal on the turntable or the motor, while the other ground

terminal (signal ground) will be connected to the tonearm. However, you may find that you get less hum by

connecting the chassis ground to the center plate screw on the AC outlet, and grounding both the tonearm

and and turntable to the signal ground. Experiment and go with whatever configuration gives the best results.

8. Signal ground

The signal ground terminal is one of two ground terminals provided on the Perseus. Two separate grounds

provide more grounding options and will allow you to reduce hum to an absolute minimum. Typically the

signal ground will be connected to the ground terminal on the tonearm, while the other ground terminal

(chassis ground) will be connected to the turntable or motor. However, you may find that you get less hum by

connecting both the tonearm and the turntable to the signal ground, and connecting the chassis ground to

the center plate screw on the AC outlet. Experiment and go with whatever configuration gives the best

results.