Construct A Truck USA Rascal 조립 지침 - 페이지 3

{카테고리_이름} Construct A Truck USA Rascal에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Construct A Truck USA Rascal 4 페이지.

ASSEMBLY INSTRUCTIONS FOR

The RASCAL Kit

17. Carefully back out the screws in the Fender Assemblies until they are flush with

the inner surface.

14. Glue the two Left Side Fender Pieces together and use the #6

x 1/2" screws to clamp the two pieces together. Hold the

front fender tips together or use masking tape until the glue

sets up.

15. Glue and assemble the Right Side Fender Pieces. Set both

assemblies aside to dry.

16. Install

the En-

gine

Hood

Cover

with two

#6 x 1/2"

screws

(do not

over-

tighten).

18.Apply glue and line up the Fender Screws with the holes in

the Body Side Panels.

19. Re-tighten the screws to help

clamp the Fender Assemblies in place

while the

glue dries.