Dantherm ACT-7 UK 사용자 설명서 - 페이지 14
{카테고리_이름} Dantherm ACT-7 UK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dantherm ACT-7 UK 20 페이지.
페이지 인쇄Menu overview
14
Main menu
Temperature
•
Set the start temperature for
the air conditioner (5-30°C).
The value is set to 15°C by
default.
Reset alarm
(use only, when alarm is visible
on display and the underlying
problem has been solved)
•
When an alarm (H or L) is
shown on the display and
the error has been rectified,
the alarm has to be reset in
the submenu (HP fault/ LP
fault) in order to start the
unit up again.
Advanced
•
Access the submenus
Submenu
(NONE)
HP fault
•
See trouble shooting
LP fault
•
See trouble shooting
Offset
•
An offset(+/- 0-99) is used to calibrate the
temperature shown on the main screen.
•
This feature can be used, when e.g. ducting
is connected and the temperature of the
ventilated place is different from the tem-
perature displayed.
Enable pin
•
The pin code (1234) is disabled by default.
When the pin is enabled, you have to type
the pin code before you can change the
settings.
-
1 = Enabling pin
-
0 = disabling pin
Language
•
The language is set to English by default.
Change the language of the menu:
-
English
-
Francais
-
Deutsche
Operation: User interactions
on page 16.
on page 16.