Dantherm Hex 6 A 매뉴얼 - 페이지 3

{카테고리_이름} Dantherm Hex 6 A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dantherm Hex 6 A 17 페이지.

Overview

This is the service manual for the Dantherm HEX 6 A unit.

Introduction

The below table of contents gives an overview of the main sections.

Please refer to the complete table of content for further information about the sections.

Serial number

This manual covers units with serial numbers equal or higher than:

Warning

It is the responsibility of the operator to read and understand this service manual

and other information provided and to use the correct operating procedures.

Heat exchangers should only be operated by qualified (trained) personnel and

repair of cooling circuit and/or electrical system done only by skilled service

people. Failure to do so can result in personal injury or equipment damage.

Read the entire manual before the initial start-up of the heat exchanger. It is important

to know the correct operating procedures for the heat exchanger and all safety

precautions to prevent the possibility of property damage and/or personal injury.

Table of contents

This service manual covers the following main topics:

Introduction

Product and functional description

Service guide

Technical information

Introduction

xxxxxx0764740

Topic

See page