Addonics Technologies ST5X1PM 사용자 설명서 - 페이지 7

{카테고리_이름} Addonics Technologies ST5X1PM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies ST5X1PM 8 페이지. Storage tower

Tower with Multilane Connector
Hot swap feature depends on the SATA controller. All Addonics SATA controllers
support the hot swap feature. Check with your system supplier to confirm the
existing SATA port on your system supports hot swap feature.
Note:
It is important that you have configured your Multilane Host controller
before connecting it to the tower.
Tower with JBOD USB 2.0 Adapter
MODE #
MODE
Description
MD2
2 HDD Mode
ON: Combines P1 (two disk drives as one large disk
drive) and combines P3 (two disk drives as another
entire disk drive
MD1
1 HDD Mode
ON: Combines 4 disk drives as one large disk drive
MD0
4 HDD Mode
ON: Separate 4 hard drives
Important
o
IDE drive settings must be set to one MASTER and one SLAVE if two drives
will be connected on a single IDE ribbon.
o
Connect the MASTER drive at the end of the cable and the SLAVE drive at
the middle.