Dantherm Cooling PS023026Z 제품 정보 매뉴얼 - 페이지 3

{카테고리_이름} Dantherm Cooling PS023026Z에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dantherm Cooling PS023026Z 14 페이지.

Dantherm Cooling , Inc. Heat Exchanger Operating & Maintenance Manual

1. GENERAL SAFETY & WARNING INSTRUCTIONS



Certain parts of electrical systems are inevitably live or have high operating temperatures.

Observe caution at all times.



Failure to observe these conditions and installation instructions can cause injury and damage.



The system is to be installed and maintained only by trained and qualified personnel.



Do not apply power until all ground connections have been made.



The unit is fitted with pressed and folded metal parts, which could have sheared metal edges. Be

cautious handling the unit, especially when working in poorly accessible places.



Check that no tools, test equipment, torches etc. have been left in or on the equipment on

completion of work.



Ensure the cover(s) and all mounting hardware is firmly secured before leaving installation.



All cable and connectors must conform to UL standards.



The heat exchanger is UL recognized and tested to UL1995. It will comply where necessary with

the safety requirements as defined in UL1995.

2. UNPACKING, HANDLING & INITIAL INSPECTION

The heat exchanger should be inspected on initial delivery and any damage to packaging noted. The

unit should be maintained in the upright position at all times. Special consideration should be given to

correctness of external packing damage or abrasion, loose components and surface marks. Any damage

should be added to the freight bill and immediately notify the freight company for filing a freight

claim. All packaging materials should be retained for inspection.

Do not attempt to operate the unit if it appears to be damaged.

HexFlow Pinnacle Series Product Information Manual

Page 3 of 14