Danver 1300 CFM DOHC Series 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Danver 1300 CFM DOHC Series에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danver 1300 CFM DOHC Series 12 페이지.

WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

A. Installation work and electrical wiring must be done by qualified person(s) in

accordance with all applicable codes and standards, including fire-rated construction

codes and standards.

B. Please refer to your BBQ owner's manual for safety instruction regarding the proper

use of propane. Follow the equipment manufacturer's guidelines and safety standards

such as those published by the National Fire Protection Association (NFPA) and the

American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE)

and the local code authorities.

C. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other

hidden utilities.

D. Some DANVER® DOHC Series Range Hoods are for wall mounting only. For safe and

secure wall mounting, the DANVER® Hood should be mounted to a solid vertical

surface of sufficient width to allow for mounting of the Hood. The horizontal surface

should extend from a vertical plane to the point directly in front of the exhaust roof

cap (or wall cap).

E. The Hood should be installed with a MINIMUM of three (3) feet of weather proof roof

coverage on all sides that are not protected from direct rain by an adjacent wall.

WARNING! TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

CAUTION To reduce the risk of fire and to properly exhaust air, be sure to duct air outside –

Do not vent exhaust air into spaces with in walls or ceilings or into attics, crawl spaces, or

garages.

Item #

Rev. 10-2017

OBL-00-008