Danver MOBILE KITCHEN CART AND COCINA 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Danver MOBILE KITCHEN CART AND COCINA에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danver MOBILE KITCHEN CART AND COCINA 6 페이지.

STEP 3)

Optional Drawer

•

Follow this step only if you have the optional add-on drawer.

Items needed: Drawer and 4-#10 screws (L).

•

Attach the drawer pull to the front of the drawer with the screws

provided with the drawer pull.

•

Remove the Front skirt.

•

Place the drawer with the open side down on the Top (A) with the

drawer front at the opening left from the removed front skirt.

(Fig. 5)

•

Align the four mounting holes and use 4 #10 screws (L) to fasten

the drawer to the Top (A). (Fig 6)

STEP 4)

Attaching Legs

•

Items needed: 4 – Legs (E) and 8 – Small nuts and screws (J).

•

Place one leg at a corner formed by two skirts from the outside, setting the leg on the

bottom of the Top (A). The caster end of the leg should be the end that is up.

(Fig. 7)

•

Use a straight head screwdriver to fasten 2 - Small screws and nuts (J). Place the

screw head on the outside of the leg, and the nuts on the inside of the skirt.

•

Repeat for all legs. (Fig. 9)

Fig-7

Drawer

Drawer pull

Fig-8

Fig-5

Fig-6

Fig-9