DanVex DEH-10K 매뉴얼 - 페이지 2

{카테고리_이름} DanVex DEH-10K에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DanVex DEH-10K 19 페이지. Industrial condensing dehumidifiers

페이지 인쇄

Foreword

Purpose of the Manual

Through the manual, you can understand the structure, installation specifications, control principles, process flow and

operation methods of the cabinet-type dehumidifier.

Knowledge Required

You need to have knowledge of automatic control and air handling to understand the manual.

Contents Included

The manual explains in detail the functions, operation, daily maintenance and troubleshooting of the cabinet-type dehumidifier.

Copying of this manual, or part of it, is forbidden without prior written permission from DANVEX.The warranty and technical

support of this product are only valid in the country or region of purchase.

NOTE

This unit must be operated by trained professionals, other wise it will cause casualties or property damage.

Please read and understand this manual thoroughly before operation to avoid damage to the unit or personal injur y or death caused by

misoperation.

Please contact the supplier or the manufacturer if there are any issues arises that are not stated in this manual.

Please keep this manual for later reference.

Standards and Codes:

GB/4706.32-2004 China National Standard No. GB/4706.32-2004, Code of household and similar electrical appliances Particular

requirements for heat Pumps, air-conditioner and dehumidifier

IEC 60335-2-40

International safety Standard for electric heat pumps, including sanitar y hot water heat pumps, air-conditioners, and

dehumidifiers incorporating sealed motor- compressors

GB/T16803-2018 China National Standard No. GB/T16803-2018, Code of of heating, ventilating, air conditioning and air cleaning

terminology

GB/T17791-2007

China National Standard No. GB/T17791-2007, Code of of Specification for seamless copper tube for air conditioning

and refrigeration field ser vice

GB/755-2000

China National Standard No. GB/755-2000, Code of of Rotating electrical machines--Rating and performance

GB/T2518

China National Standard No.GB/T2518, Code of of continuously hot-dip zinc and zinc alloy coated steel sheet

GB/50016-2006 China National Standard No.GB/50016-2006, Code of Design on Building Fire Protection and Prevention

GB/50243-2002 China National Standard No. GB/50243-2002,Code of acceptance for construction quality of ventilation and air

conditioning works

GB/50019-2003

China National Standard No. GB/50019-2003,Code for Design of Heating Ventilation and Air Conditioning

GB/50015-2019 China National Standard No. GB/50015-2019,Code for design of building water supply and drainage

GBJ16-87

China National Standard No.GBJ16-87, Code for fire protection of building design

GB/T7725-2004

China National Standard No. GB/T7725-2004, Code for room air conditioners

GB/T18883-2002

China National Standard for indoor Air Quality Standard

GB/T19411-2003

China National Standard for dehumidifiers

UL/474-1993

American Safety Standard for Dehumidifiers

GB/T191-2008

China National Standard for Packaging - Pictorial Markings for Handling of Goods

ANSI/AHAM DH-1-2008 ANSI/AHAM Standard for dehumidifiers

ANSI/UL94

American standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances

UL/484-2014

American standard for Room air conditioners

UL/969

American standard for marking and labeling systems used for permanent product identification

Warning

This symbol indicates the rules that must be followed! If it is not strictly followed,

it may cause mild to moderate damage to the machine or signs of personal injury.

This symbol indicates actions that must be prohibited!! If not strictly followed,

it may cause serious damage to the machine or personal injury or death.

Please follow this manual for

installation. Please read this manual

carefully before running or ser vicing

the unit.

Before installation, please check

whether the power cord used is

consistent with the power required

on the nameplate, and check the

safety of the power supply.

Be sure to use special accessories

and parts during installation.

SPECIAL

Otherwise, it may cause water

ACCESSORIES

leakage, electric shock , fire and

other accidents.

The power connection of this unit

adopts Y-type connection, and the

SPECIAL

diameter of the power cord should

be large enough. If the power cord

is damaged, in order to avoid danger,

the power cord should be replaced

by the manufacturer or professionals.

Do not insert your fingers or objects

into the air outlet or return air grille.

Do not start or stop the unit by

pulling out the plug.

Do not allow children to operate

the unit.

The unit can only be cleaned after

shutting down and cutting off the

power supply, other wise you may

get an electric shock or be injured.

DANVEX assumes no responsibility for personal injury or equipment damage caused by improper installation, commissioning,

unnecessary maintenance, and failure to follow the regulations and instructions in this manual.

The installation should be carried

out by the seller or qualified

For units using line control,

professionals, please do not install

the line controller store must

the unit by yourself. Incorrect

be connected first, other wise

installation may cause accidents

the line controller will be unusable.

such as water leakage, electric

shock or fire.

The unit should be grounded, and

the power socket must be equipped

Do not use or store flammable

with a ground wire to ensure that

and explosive dangerous goods

the machine is effectively grounded

next to the unit. There should

through the power socket to avoid

be at least 1.5m between the

the risk of electric shock . Do not

combustible surface and the unit.

connect the ground wire to gas

pipes, water pipes, lightning rods or

telephone wiring.

After installation, please check

The space above the equipment

and confirm whether the

installation is at least 50 cm, the

connections of drain pipes, ducts

rear and the left and right sides

and wires are correct to prevent

are at least 100 cm, and the front

water leakage, refrigerant leakage,

is at least 200 cm.

electric shock or fire accidents.

Drainage pipes should be installed

Do not step on the unit, and do

correctly in accordance with the

not place objects on or on the air

installation instructions to ensure

inlet and outlet of the unit.

proper drainage, and insulation

measures should be taken to avoid

condensation.Improper installation

of pipes will cause water leakage.

Do not repair the unit by yourself.

Volatile liquids such as thinner or

gasoline will damage the

Wrong maintenance will cause

appearance of the unit. (Only use a

electric shock or fire.

soft dr y cloth and a damp cloth

dampened with a neutral detergent

to clean the casing of the unit).

Once the unit is turned on, it must

After the unit is installed, electric

run for at least 5 minutes before it

leakage test should be carried out.

can be turned off, otherwise it will

affect the compressor oil return.

When the unit is not used for a

Do not operate the unit with

long time, please cut off the power

wet hands.

supply of the unit.

When a problem occurs (such as a

Do not pour or rinse the unit with

burning smell, etc.), please turn

water, other wise it may cause

off the unit and unplug the power

malfunction or risk of electric shock .

cord. (Cut off the power supply).