Danzco DH0070 14G 작동 및 부품 설명서 - 페이지 4

{카테고리_이름} Danzco DH0070 14G에 대한 작동 및 부품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danzco DH0070 14G 16 페이지. Connect and cut hydraulic chain saw

Introduction

Thank you for purchasing a Danzco, Inc. product. Our goal is to provide quality products for your job. This

manual contains warranty information, installation information, operation instructions, parts ordering information,

service contact information.

This Danzco, Inc. product carries a one year or 2000 hour warranty on the Danzco, Inc. designed and built

components covering material and workmanship. Purchased components carry the manufactures warranty. This

warranty does not cover normal wear from use, damage from abuse or misuse, damage from contamination,

damage from natural disasters, fire damage or incorrect installation. This warranty does not cover labor to remove

and replace parts, shipping and handling of parts or shipping and handling for items returned for repair. If any

component fails you must contact Danzco, Inc. at (360)264-2141 before doing any repair work. We will provide

assistance to obtain warranty from other manufactures on their components.

When you receive the two boxes containing parts, you will need to reassemble the unit. The larger box (Fig. 2)

contains the main frame sub assembly, (Fig.1, items 1 and 2). The smaller long box (Fig. 3) contains the feed

cylinder (Fig. 1, item 3), feed and motor control valve (Fig. 1, item 4), bar oil tank (Fig. 1, item 5), bar guard

(Fig. 1, item 6), bar oil pump (Fig. 1, item 7), saw bar (Fig. 1, item 8), saw chain (Fig. 1, item 9), weld down

mount plate (Fig. 1, item 10), and assembly fasteners.

Fig. 1

Fig. 2

Fig. 3