Belimo AF230-S US 매뉴얼 - 페이지 3

{카테고리_이름} Belimo AF230-S US에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Belimo AF230-S US 11 페이지. On-off, spring return fail-safe, 120 or 230 vac

Installation Instructions

Quick-Mount Visual Instructions for Mechanical Installation

Dimensions

(All numbers in brackets are in millimeters.)

QUICK-MOUNT VISUAL INSTRUCTIONS

1. Rotate the damper to its fail-safe position. If the shaft

rotates counterclockwise, mount the "CCW" side of the actu-

ator out. If it rotates clockwise, mount the actuator with the

"CW" side out.

2. If the universal clamp is not on the correct side of the actua-

tor, move it to the correct side.

Remove

for 3/4"

to 1.05"

shafts

3. Slide the actuator onto the shaft and tighten the nuts on the

V-bolt with a 10mm wrench to 6-8 ft-lb of torque.

4. Slide the anti-rotation strap under the actuator so that it

engages the slot at the base of the actuator. Secure the

strap to the duct work with #8 self-tapping screws.

NOTE: Read the "Standard Mounting" instructions, on the next

page, for more detailed information.

IND-AF2 Position Indicator

(optional)

IND-AF2 Position Indicator

(optional)