Addonics Technologies DDU7SAS 사용자 설명서 - 페이지 5

{카테고리_이름} Addonics Technologies DDU7SAS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies DDU7SAS 10 페이지. 1:7 blu-ray / dvd duplicator

1. Copy

Function#1 Copy, instant copy source (disc/image) to the target drives (optical writes). Use Function#8

to select source drive before copying. Select function#1. place a source disc into source drive and blank

disc into the target drives. A rewriteable disc can be used as target media, however all data will be

erased before copying.

Press ENT to start copy function when all discs are ready. After complete, system will show spent time

and the amount of OK disc on the screen, the OK disc will be ejected.

2. Test

Function#2, copy simulation, no data will be written to the write once media (DVD+R is not supported

for this function).

Press ENT to start simulation. If rewriteable disc is used, all contained data will be erased before

simulation.

3. Test & Copy

Function#3, will do copy simulation before copy function. Press ENT to start simulation and copy.

Note, only passed test disc will do the copy.

4. Verify

Function#4, check readability of the burned disc.

5. Compare

Function#5, to check if target disc is identical to source disc.

Compare result :

OK: Source and target disc are identical

Fail: TOC not match, compare skipped due to contains do not match.

Diff: Shows how many bytes are different.

6. Prescan

Function#6, to check if source disc is readable and without read error.

7. Disc Info

Function#7, to report disc information, disc type and capacity.

8. Select Source

Function#8, to set which drive as source device. The drive on CH01 will be chosen as source device.

Press ENT, and then press ▲ ▼ to select the source.

Assume that HDD is selected as the source device and selected partition contains no data, an error

message "Source Drive Not Ready" will show on LCD while trying copy function. In that case, go to

Function#9 Image to load the data into the chosen partition first.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/