Addonics Technologies DGBRC11 사용자 설명서 - 페이지 5

{카테고리_이름} Addonics Technologies DGBRC11에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies DGBRC11 8 페이지. 1:4 blu-ray & 1:11 dvd digicopier

12-11 Burn Mode

Sets style of burning for Audio CDs. DAO (Disc At Once) burns the entire media without

stopping. TAO (Track At Once) burns each audio track individually. Default setting is DAO.

12-12. Display Time

When set to ON, unit will display a timer during copy operations. Default setting is ON.

12-13. Button Sound

When set to ON, unit will emit a beep sound whenever keys are pressed. Default setting is

ON.

12-14. Device Info

Displays details about each drive unit.

12-15. System Info

Displays details about the duplicator.

12-16. Quick Erase

Erases file system on all rewritable media detected.

12-17. Full Erase

Erases all data on all rewritable media detected.

12-18. Auto Close Tray

Allows trays to be closed automatically after a set time when Copy or Test functions are

selected. Default setting is OFF.

12-19. Quick Compare

Controls behavior of the Compare function. When set to a numerical size, only that much data

will be compared before the unit considers a compare OK. Default setting is OFF for full

comparison.

12-20. Link Mode Select

Allows multiple duplicators to be connected together to copy more targets from a single

source. This feature is not supported for this duplicator.

12-21. Re-scan

Rescans all ports for drives with media inserted.

12-22. Tray-In/Out

Controls behavior of ejecting drives. Default setting is All Once.

12-23. Boot Time Delay

Sets delay in seconds during initialization to allow drives to settle. Default setting is 5

seconds.

12-24. Start Tray Eject

When set to ON, all drives will be ejected during initialization after power up. Default setting is

ON.

12-25. Disc Redetect

When set to ON, the duplicator will retry once if an error occurs during disc detection. This

feature is used for low quality media. Default setting is OFF.

12-26. Show Burn Speed

When set to ON, burn speed will be displayed during copy process. Default setting is ON.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/