Addonics Technologies DGBRC3 사용자 설명서 - 페이지 2

{카테고리_이름} Addonics Technologies DGBRC3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies DGBRC3 2 페이지. 1:3 blu-ray/dvd digicopier

DigiCopier III Overview

There are four buttons and an LCD on the panel of DigiCopier III.

1 – LCD shows a function or a message.

2 – it is used to scroll up function menus.

3 – it is used to scroll down function menus.

4 – it is used to execute a function.

5 – it is used to cancel a function.

II.

Connecting the power cable and turning on the DigiCopier III

III.

Steps for the Copying Process

Note: may not able to copy-protected Blu-ray, DVD or CD.

Step 4 After the Blu-ray or DVD-ROM and DVD writers detect DVDs, press ENT button to start copying.

LCD will show the copying information as follows.

Copy-DVD

4213.4MB

When copying is in progress, MB and time will decrease while the percentage of completion will increase.

"MB" means the size of data that you want to copy.

When copying comes to an end, LCD will show the results as follows. The DVDs that were successfully

copied will eject automatically.

Copy

OK: 07

Connect the power cord provided from the wall outlet to the back of the

DigiCopier III.

A main power switch is located at the back of the tower. Turn the switch on. Another

auxiliary power switch is located on the front of the tower.

Step 1 Turn on the DigiCopier III by pressing the auxiliary power switch.

Step 2 Insert media you wish to duplicate into the source tray on the top.

Step 3 Populate the destination trays with blank CDs, DVD or Blu-ray

media. A rewritable Blu-ray or DVD containing old data can also be use,

but the old data will be automatically erased.

7:30

Duplicator Panel

ENT

ESC