Addonics Technologies HD4SNDXHS-A 사용자 설명서 - 페이지 7

{카테고리_이름} Addonics Technologies HD4SNDXHS-A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies HD4SNDXHS-A 7 페이지.

ing one partition with the firmware file in the root directory.

NOTE:

This function scans the entire disk before proceeding. Providing a drive that is as small

as possible is strongly recommended.

11-03. Compare Firmware

Used to confirm correct firmware. Connect a drive formatted as FAT contain-

ing one partition with the firmware file in the root directory.

NOTE:

This function scans the entire disk before proceeding. Providing a drive that is as small

as possible is strongly recommended.

11-04. Quick Erase HDD

Scans the ports, then quickly erases all sectors on all connected drives.

11-05. Full Erase HDD

Scans the ports, then completely erases all sectors on all connected drives.

11-06. H/W Diagnostic

Starts comprehensive tests for Ram, LCD, buttons, ports and Flash.

11-07. Load Default

Resets all configuration settings to default.

11-08. Copy HPA

Enables copy functions to duplicate the source drive's Host Protected Area.

Normally this area is defined as not available to a host controller as defined

by ATA/SATA specifications.

11-09. Burn In

Runs a function continuously until aborted. Selections are Copy & Compare,

Compare, Async Cpy & Cmp, Async Compare.

www.addonics.com

Phone:

Fax:

Email:

408-573-8580

408-573-8588

http://www.addonics.com/sales/query/