Audiotec Fischer match MS 5X 사용 설명서 - 페이지 7
{카테고리_이름} Audiotec Fischer match MS 5X에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotec Fischer match MS 5X 12 페이지. Component- and coaxial speaker systems
Audiotec Fischer match MS 5X에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)
페이지 인쇄
Congratulations!
Dear Customer,
Congratulations on your purchase of this high-
quality MATCH speaker system.
This system highlights best quality, excellent manu-
facturing and state-of-the-art technology.
After 30 years of experiences in research & deve-
General instructions
General instructions for installing a MATCH
speaker system
To prevent damage to the speakers and possible in-
jury, read this manual carefully and follow all instal-
lation instructions. This product has been checked
for proper function prior to shipping and is guaran-
teed against manufacturing defects.
For a proper performance and to ensure full war-
ranty coverage, we strongly recommend to get this
product installed by an authorized MATCH dealer.
If you choose to perform your own installation read
the following information and precautions carefully.
Failure to follow the stated precautions may result in
personal injury and/or damage to the audio system
or vehicle.
1.
Always make sure that the speaker will fit into
the intended mounting location and that there
is adequate depth for the magnet system.
2.
Check for adequate space between spea-
ker and window, window crank, power win-
dow mechanism, seat, rear deck torsion
bars, and other items which may interfere
with the speaker's mounting. This is very
important if any hole cutting is required.
Detailed
size
in the dimension section of this manu-
al.
Take care that the
face is flat and free from all obstructions.
3.
Do not mount the speakers where water may
splash on them.
information
is
indicated
mounting sur-
lopment of audio products this speaker system ge-
neration sets new standards.
We wish you many hours of enjoyment with your
new MATCH speakers.
Yours
AUDIOTEC FISCHER Team
4.
The quality of the installation has a signi-
ficant effect on the overall performance of
the speaker system. Treat each installa-
tion step with a high degree of attention.
5.
Avoid low frequency cancellation caused
by
air
leakage
basket and the mounting surface (e.g.
mounted on a bended or uneven sur-
face or mounted in an oversized hole).
6.
Mounting panel reinforcement may be ne-
cessary in some cases in order to ensure a
stable , torsion-free and even surface. This
can be achieved by mounting the spea-
ker on a metal or wooden sub-baffle be-
hind the body or door panel. Consult an
installation specialist for further advices.
7.
In most cases you can use the original spea-
ker mounting locations at the doors, body pa-
nels or the rear deck. If these are not available
you have to prepare your own secure installa-
tion place. Due to their structural integrity and
accessibility the precut mounting holes should
be used whenever possible.
Important:
Never cut any metal that is an integral part of an
automobile's safety or structural car body.
between
the
speaker
7