DURASONIC DS2L 사용자 설명서 - 페이지 10

{카테고리_이름} DURASONIC DS2L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DURASONIC DS2L 18 페이지.

Degassing

Step

Action

Turn the HEAT ON

Turn the TIMER to 5-10 and let the cleaner run to allow the solution to

"degas".

NOTE: To stop ultrasonics at any time, press red off button.

Step

Action

Set the TIMER for the amount of time you wish the items to be cleaned.

Place the items into a basket.

Slowly lower the basket into the tank. Do not allow items to contact the tank

bottom.

When items are clean and time is up, slowly remove them from the cleaner.

Rinse the clean items with clean water and dry them, if necessary.

Control

On button

Off button

Timer control

buttons

Digital Timer Display Displays select time for cleaning.

Temperature Knob

Heat Light Indicator

Function

Green touch button located on the left lower half of panel.

Press to activate power to cleaner.

Red touch button located on the middle lower half of panel.

Press to deactivate power to cleaner.

The two blue touch buttons located in between the on/off

buttons. Use to select the amount of time you want the

machine to run. Up arrow increases time by 5 minutes and

down arrow decreases time by 5 minutes. Note: machine will

power off when timer is finished.

Located on the right side of panel. Used to set cleaner at

desired temperature (In Celsius). The temperature ranges from

O° Celsius to 70° Celsius.

Red "Heat Light Indicator" turns on indicating that the heat on

cleaner is active.