Contacta STS-K080-IP 설치 및 사용 설명서 - 페이지 13
{카테고리_이름} Contacta STS-K080-IP에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta STS-K080-IP 20 페이지. Window intercom system
페이지 인쇄
Our amplifier provides full open duplex communication and is compatible with
all of our speech transfer systems. It features individual displays for staff or
customer adjustments and individual fault lights for easy fault diagnosis.
Overview of Front Panel Buttons
Volume In
Increase and decrease
Engineers Mode
Before entering engineers mode, cycle the power. To do this either:
•
Switch the power off at the wall socket and back on again.
or
•
Remove the power connector and re-insert it.
To enter engineers mode, simultaneously press and release the following
buttons within 20 seconds of cycling the power:
•
Settings button
•
Volume In increase button
•
Volume Out increase button
The on/off and settings buttons in engineers mode operate as follows:
Move to the next setup area
Please note
•
Save and exit engineers mode after making any adjustments.
•
The amplifier will automatically exit engineers mode without saving if no
buttons are pressed for 2 minutes.
Amplifier Setup
Volume Out
Increase and decrease
Save and exit engineers mode
On/Off
Settings
13