Contacta STS-K015-01 설치 및 사용 설명서 - 페이지 8

{카테고리_이름} Contacta STS-K015-01에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta STS-K015-01 16 페이지. Speech transfer system

5. Install the overhead loudspeakers:

a. Find a location on the staff side

directly above the pass-through

tray. Ensure there is sufficient

space and there is no glass

behind where you want to drill.

b. Check the cable route to the amplifier situated under the counter.

Ensure access through the counter top and suitable cable length.

Drill a cable hole through the rear of the counter if neccesary.

Mark 2x fixing points to attach the overhead speakers.

d. Drill pilot holes and attach the loudspeaker bracket assembly using

supplied screws.

e. Route the cable from the loudspeaker back to the amplifier in a

neat and tidy fashion, using cable containment where required.

Repeat the above steps on the customer side of the counter.

6. Install the power supply close to a power socket outlet using the supplied

mounting bracket and fixing screws.

Bridge Bar Unit and Surface Mic

Position the bridge bar unit on

the customer side of the counter

top in a central location or

around the pass-through tray if

present.

2. Ensure the microphone and

bridge bar are flat against the

screen.

3. Mark the 2 fixing points and

1 cable route hole ready for

drilling.

4. Drill pilot holes and a cable hole

and attach the assembly with the supplied screws.

6. Feed wiring through the cable hole back to the amplifier. Using provided

fixing holes and screws, attach the bridge bar cover carefully to avoid

damage to wiring.

Fixing

points

Fixing

points

Cable

hole

Bridge Bar cover

fixing holes