Contacta STS-K070 설치 및 사용 설명서 - 페이지 14

{카테고리_이름} Contacta STS-K070에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta STS-K070 20 페이지. Speaker pod system
Contacta STS-K070에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (16 페이지)

페이지 인쇄

When powered and in normal operational mode the amplifier will display

Volume In LED 1 as steady green.

When the amplifier is switched off using the On/Off button, audio is muted

and LEDs are not illuminated; press any button to turn the amplifier on again.

To adjust the staff volume level:

•

Press and hold the Volume In (+) or (-) buttons to increase or decrease the

level. The corresponding LED bar will show the volume setting.

To adjust the customer volume level:

•

Press and hold the Volume Out (+) or (-) buttons to increase or decrease

the level. The corresponding LED bar will show the volume setting.

For best possible performance:

1. Ensure the customer and staff volumes are turned completely down.

2. Adjust staff volume (Volume In) to a comfortable level.

3. Increase customer volume (Volume Out) until feedback is heard.

4. Decrease customer volume (Volume Out) until feedback is just eliminated.

Once you have followed the above steps:

1. Staff pods are optimally positioned 300mm from a staff member.

2. Check the amplifier is fully functional by ensuring the red 'fault' light is

NOT displaying.

The system is now ready to use.

Fault Diagnosis LEDs

Using the System

•

Volume In LED 8 will stay red if there is a

fault with the staff microphone.

•

Volume Out LED 8 will stay red if there is a

fault with the customer microphone.

•

Volume In LED 8 will flash red if there is a

fault with the loop (i.e. a broken aerial).