Contacta STS-K072 설치 및 사용 설명서 - 페이지 10

{카테고리_이름} Contacta STS-K072에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta STS-K072 20 페이지. Window intercom system speaker pod and screen mounted microphone
Contacta STS-K072에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (16 페이지)

페이지 인쇄

Speaker Pod and Screen Mounted Microphone - STS-K072

1. Position the screen mounted microphone stem's on the customer side of

the counter top.

2. Mark the 2 fixing points and 1 cable route ready for drilling (see the

diagram below).

3. Drill pilot holes for the fixings and a cable hole if neccesary.

4. Feed wiring through the cable hole back to the amplifier and fix the

microphone in place using the supplied screws.

5. Fix the microphone head to the screen using the double-sided pad

supplied.

6. Place the staff pod on the staff side of the counter top, ensuring it does

not cause an obstruction and is as close to staff as possible. It should

ideally be no more than 300mm away from a staff member.

7. Place the speaker pod on the customer side of the counter top, ensuring it

does not cause an obstruction.

8. Speaker pods and staff pods can be either free standing or fixed. Move to

step 13 if you do not wish to fix the pods to the counter.

9. Use cable management holes in the counter to run the staff pod and

speaker pod cables to the amplifier. If there are not already cable

management holes, drill suitable locations near the rear of both the staff

and customer sides of the counter.