Addonics Technologies HDUSI325-A 사용자 설명서 - 페이지 5

{카테고리_이름} Addonics Technologies HDUSI325-A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies HDUSI325-A 8 페이지. Hdd duplicator pro

Quick Start

Insert the source and target drives and power up the unit. By default, the

duplicator will initialize, scan for drives, and offer the copy function. When the

copy function appears, press ENT to begin copying.

Canceling Functions

When selecting menu options, canceling is done by pressing ESC. When the

unit is busy performing an operation such as copy, verify, or overwrite, the

operation can be canceled by holding the ESC button until the unit beeps.

Duplicator Functions

The duplicator has three menu sections: The Main menu, Setup Options, and

Advanced Setup Options. Setup Options is accessed through the Main

menu. Advanced Setup Options is accessed by holding the ESC button from

any other menu until the unit beeps.

1. Copy HDD

Scans the ports, then copies from the source to the target.

2. Compare HDD

Scans the ports, then target will be compared to source.

3. PreScan Source

Reads all blocks on the source drive to confirm no I/O errors are

encountered.

4. ReScan BUS

Manually scans all ports and reports how many units were found.

5. Source Size

Examines the source drive and reports total space and space used, if

drive contains compatible partitions. Press up/down to change display,

ESC to exit.

6. Secure Erase

Scans all ports, then erases all data on all connected drives (including

Source HDD). NOTE: some drives will remain in a locked state when the

process is complete. Drives that are locked may not appear to an operating

system and will cause an I/O error if used as a target in the duplicator. If this

happens, start secure erase again and hold ESC to cancel the operation a

few moments after it begins.

7. Overwrite

Overwrite is used to write data onto the entire hard disk, it will destroy all

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/