Addonics Technologies HDUSI3TDR 사용자 설명서 - 페이지 8

{카테고리_이름} Addonics Technologies HDUSI3TDR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies HDUSI3TDR 18 페이지. 1:11 hdd duplicator pro

ReScan Bus

ReScan Bus allows swapping the source or target in and out without having to

reboot the system.

Choose option 6 from the menu:

Press ENT to re-scan hardware. The LCD will display the follo wing info.

When the scan is complete the LCD will display the fol

Source Size is used to show the capacity of the source.

Choose option 7 from the menu:

Press ENT and the LCD will show the following info.

Then press ENT and the LCD will show the data's size info.

Secure Erase is used to wipe the data of the hard disk, i t will erase all of HDD of duplicator

(included Source HDD).

Choose option 8 from the menu:

Press ENT to access option. By default it is set to No. Use the Up and Down arrow keys to choose

Yes.

Press ENT and the LCD will show the following info.

www.addonics.com

6. ReScan BUS

Re-Scan BUS NOW?

Yes

lowing info.

Bus re- scan OK!

7. Source Size

HDD:Hitachi

Size:232.9GB

HDD:Hitachi

Data:200.9GB

8. Secure Erase

Wipe all data.

Continue? No

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/