DAPAudio FCS-56 매뉴얼 - 페이지 6

{카테고리_이름} DAPAudio FCS-56에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio FCS-56 12 페이지.

FCS-56

Installation

01) Drill a hole in the ceiling, big enough to fit the speaker (Ø 204 mm).

02) Force the speaker grill out of the housing and remove the screws in order to access the cables and

connectors.

03) Remove the speaker from the housing by removing the clamps.

04) Choose the desired output volume by connecting the red cable to one of the 4 available power

taps: 0,75/1,5/3/6W.

05) Connect the common cable to the (-) connector and the main feed cable the (+) connector.

06) Put the speaker back in the housing, secure it with the clamps and replace the speaker grill.

07) Insert the speaker into the hole on the ceiling.

08) For extra safety, attach the speaker to the ceiling by means of a safety cable.

Ordercode: D6576

Fig. 01

Fig. 02

Fig. 03