DAPAudio K-115 제품 설명서 - 페이지 7

{카테고리_이름} DAPAudio K-115에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio K-115 9 페이지.

Description of the device

Features

The K-115 is a 15" 2-way Fullrange speakersystem:

• 15/1 passive plastic vented PA speaker system

• Woofer:

• High Driver:

• Nominal Impedance:

• Power Handling:

• Freq. Response (-3 dB):

• Freq. Range (-10 dB):

• Sensitivity (Full Space):

• Peak SPL at 1 m (Theoretical):

• Nominal Dispersion (H x V):

Overview

Installation

Remove all packing materials from the K-115. Check that all foam and plastic padding is removed.

Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.

Do not supply power before

15", 8 Ohm

63 mm Voice Coil

1.375" Titanium Dome, 8 Ohm,

63 mm Voice Coil

8 Ohm

225 Watt Continuous

450 Watt Program

900 Watt Peak

60Hz – 16.000 Hz

45Hz – 20.000 Hz

96 dB / W / m

125.5 dB

65° x 65°

all components of the system are

set up and connected properly.

Fig. 1