Addonics Technologies Jasper II SID 사용자 설명서

{카테고리_이름} Addonics Technologies Jasper II SID에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies Jasper II SID 2 페이지. Duplicator pro

Default settings on the duplicator:

Copy – set to WHOLE MEDIA. This setting copies everything in the source

drive to the target drive sector by sector. This setting ensures a good copy of

any drives: boot drive, blank drive, encrypted drive or drive with any file

system.

To speed up the copying, you may change the setting to SYSTEM and FILES.

This setting skips copying sectors with no recognizable data. This is only for

drives that have the following file system: NTFS, FAT/16/32, eXFAT, HFS,

EXT3/4 or XFS. This setting is not recommended for copying boot drive as

certain boot sectors may not be copied correctly.

Performance – set to SPEED for best performance. May encounter

compatibility issue with certain SSD. Should that occur, try to change the

setting to BALANCE or COMPATIBILITY.

HPA – set to SKIP.

Please review the Jasper II Controller user guide for all the detail settings.

Making duplicates

Power up the unit by pressing on the ON/OFF button at the front lower right-

hand corner. Once the unit is ready, the LCD should display

HDD Duplicator

1. Copy

The unit is now ready. Simply loads a source drive to the source slot (the first

bay on the top) and the target drives to the target slot (the lower bay). After a

few seconds, the LCD should display the number of target drives detected.

Press the OK button on the LCM control panel to start the copying.

Note: some drives may not be detected correctly. In that case, please leave the

drive inside the unit and re-start the duplicator.

www.addonics.com

Phone:

408-573-8580

Fax:

408-573-8588

Email:

http://www.addonics.com/sales/query/

Jasper II SID Duplicator PRO

Model: JD2-SID

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/