4 BOX S Series 사용 및 설치 지침 - 페이지 2

{카테고리_이름} 4 BOX S Series에 대한 사용 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 4 BOX S Series 2 페이지.
4 BOX S Series에 대해서도 마찬가지입니다: 사용 및 설치 지침 (2 페이지)

Instructions for use and installation
General description
Relè Lite Smart is a single output connected with a WiFi/BLE
module, with a single on-board relay operating in the 100-
240V range up to a maximum of 7A; Relè Lite is Smart and can
be controlled remotely via smartphone or App.
2
3
1
2
4
5
1
6
5
1. Push button with RGB LED backlite
2. Terminals I1 and I2 for optional button inputs
3. Neutral N terminal
4. L terminals for input phase
5. NC and NO terminals to connect output or normally open
or closed contacts
6. Load connection terminal C
Operating mode
Relè Lite Smart can be programmed to have functions of:
• Single light button
Confuguration
To perform the first installation, replacement and/or removal
of a device and for any other information, refer to the manual
which can be downloaded from the site.
Precautions for use
All direct connections to the mains conductors must
be carried out by trained and authorized technical
staff. Pay attention to any danger indications placed
on the device or contained in this manual highlighted
with the symbol (
).
Do not use the device in gas saturated environments.
Do not place the device near heat sources.
Use only indoors.
Installation rules
Installation must be carried out by qualified staff
in compliance with the provisions governing the
installation of electrical equipment in force in the
country where the products are installed. The
installation must be carried out with the system
switched off.
Warranty
This product is covered by a 2 years from the date of purchase
on parts and labor warranty. To enforce the guarantee it
is necessary to keep the proof of purchase. The warranty
does not cover any damage due to shocks or accidents. The
components of the appliance must not be opened or repaired
by people outside 4box company.
For more info.
4box.it
Technical info
7 x 2,5 mm
2
+5 °C
+45 °C
Operation voltage
100V – 240V /50-60Hz
Maxi electric current
7A
Max load
1610W
Technology
Radio WiFI/BLE
Exercise frequency
2.4 GHz
Standby consumption
1 Wh
Maintenance and cleaning
Before cleaning, disconnect the product from the power
supply. The product does not require specific maintenance. To
clean the product, use a simple dry cloth. Do not use abrasive
or corrosive substances. Do not spray cleaning products
directly on the switch.
Disposal
This logo indicates devices that are no longer
usable cannot be placed in the normal containers
for ordinary waste. The toxic substances that may
be contained in them, in fact, could represent a
risk to health and the environment. These devices
should be returned to your dealer or disposed of as
determined by local authorities.
Declaration of Conformity
4 BOX declares under its own responsibility that the Relè Lite
Smart device complies with the following directives and that
this conformity has been assessed in compliance with the
respective applicable standards:
• Directive 2014/53/EU (effective use of the radio spectrum in
order to avoid harmful interference).
• Reference standard: ETSI EN 300 328 V2.2.2
• Directive 2014/35/EU (protection of users' health and
safety).
• Reference standard: EN 62368 -1:2014+A11:2017
• Directive 2014/30/EU (protection requirements regarding
electromagnetic compatibility).
• Reference
standards:
CEI
EN
55032:2015,
55035:2017+A11:2020 and ETSI EN 301 489-1/17.
• Directive 2013/35 /EU (protection requirements regarding
physical agents).
• Reference standard: CEI EN IEC 62311:2021
• RoHS directive.
Wiring diagrams
Diverter
N
L
Relè Lite Smart as a diverter.
N
L
EN
*In the input it can be connected indiscriminately to Phase (L) or to Neutral (N)
Button or *
switch
Relè Lite Smart as an interrupted.
Inverter
Diverter
Relè Lite Smart use like an
inverter.
EN