Audiovalve LUMINARE 2015 사용 설명서 - 페이지 10

{카테고리_이름} Audiovalve LUMINARE 2015에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiovalve LUMINARE 2015 17 페이지. Ultra highend headphone tube amplifier

USAGE

Dear AudioValve fan,

we are delighted that you have for your audio - have bought a device from AudioValve hobby. We know

this much appreciated and will always strive to meet your expectations.

The LUMINARE is a logical development of our highly successful predecessor models RKV. This

amplifier is designed for playing music through headphones in the first place, and can act in different

impedances. You can also use the amplifier but also for playing background music about speakers.

Playing music through speakers has minor importance because the power of the amplifier is rated for

headphones.

The AudioValve - LUMINARE is a small-power amplifier, specially designed to drive headphones. It

offers a sound quality and driving capabilities far beyond that of an ordinary headphone socket found on

a CD-player or amplifier and thus allows you to exploit the full sonic potential of your headphones.

Due to the close contact to your ears, headphones provide an extreme channel separation whilst

listening to stereo recordings. Unlike loudspeakers, none of the sonic information in the left channel is

acoustically transferred to the right ear and vice versa. Although this adds to the extreme high level of

detail that can be achieved with headphones, it subconsciously also introduces mental stress. The

natural correlation of stereo sound interpreted by the brain is lost.

The AudioValve - LUMINARE not only offers normal stereo reproduction of your music, but it also has a

facility to add some of the left channel information to that of the right channel and vice versa. Thus

mental stress is reduced and music can be enjoyed with more ease.

For safety and in order to obtain the best possible results with your new headphone preamplifier, we

ask you to read these instructions carefully. The LUMINARE was developed by music-lovers for music-

lovers and we hope that it will serve you well for a long time.

Connections

At the rear side of the AudioValve - LUMINARE more pairs of inputs allow you to connect different audio

sources that have typical output voltages (CD- player, cassette-player, tuner, mini disc-player, ...). The

source you want to listen to can be selected by the rocker switch at the middle on the front side of the

amp.

The LUMINARE can also be used as a preamp. He has two gold-plated RCA connectore for pickup a

signal for a power amp. Its signal come from the OTL stages divided signal level by 10.

Your headphone should be connected to one of the headphone - sockets on the front side of the

LUMINARE. You can also use the sockets to connect two headphones simultaneously.

The sockets are 2 intended for 6.35 mm stereo jacks and for XLR jackets too. The left jacket support

the left channel ( XLR pin 2 ) and the bottom jacket support the right channel ( XLR pin 2 ). If your

headphone only has a 3.5 mm jack, then use an adapter that can be obtained in most electronics or

audio shops.

Before you switch ON the amp, please connect all cablers and turn down the volume control, the switch

ON the amp. After 1 Minute turn up the vulume and hear whats going on ....