AUDIOVECTOR S3 사용자 설명서 - 페이지 6

{카테고리_이름} AUDIOVECTOR S3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUDIOVECTOR S3 6 페이지.

페이지 인쇄

Care of equipment

The fine silk matt lacquer of your audiovector

speakers is best preserved and cleaned using the

special micro fibre cloth supplied with the speak-

ers. We recommend that you wipe your speakers

with this cloth once a month (at least) to remove

dust and fingerprints and for best general

appearance.

We also recommend that you clean the plugs of

the speaker cables every six months using a soft

cotton cloth with a little alcohol on it. This way

you will avoid the slight deterioration of sound

quality which originates from the build up of third

harmonic distortion caused by gradual lack of

good contact.

Upgrading equipment

audiovector is the only speaker brand, which

includes iUc (individual Upgrade concept

technology). This technology makes it possible

to upgrade your existing speakers to a more

sophisticated model, and to realise future

improvements and technological developments.

in a world where models change only too often,

audiovector has decided to look after its end

users and make its products truly future proof.

Positioning for stereo

look at the chart showing how audiovector

positions the speakers in our living room-like

70 CM

2.5

avoid placing the speakers in corners of the room.

Make sure speakers are exactly the same distance

from the back wall.

Keep area between speakers and

soundstage free of objects.

in rectangular rooms, place speakers against the

shorter wall.

For 5.1 Surround positioning, refer to your

processor manual.

aRa: if your speakers are used in a bare room with

too much echo, activate the aRa circuit to neutralize

the unwanted room effects (standard on S3

avantgarde, other S3 models ready for upgrade).

listening room. Though not critical, this is how we

4-6°

achieved the best results. experiment along the

lines of the chart before you mount the spikes.

Positioning for surround sound

For surround, please use the same position

for the front speakers as in stereo. The centre

speaker can easily be adjusted for differences

in distance via your processor. This goes for rear

speakers as well. The subwoofer can be placed in

various places in your room, using multiple

available adjustments.

Active Direct Concept allows you to build a

modular hi-fi or surround sound system, with

the aim of expanding even the smallest system

into a full active configuration with our Avex

electronic crossover and multiple amplifiers.

Individual Upgrade Concept technology gives

you the option to upgrade your speakers

whenever you want. This means that all

Audiovector's are future proof.

Low Compression Concept technology allows

the membranes of the drivers to move freely

under all conditions. This means that your

Audiovector speakers will stay faithful to

whatever signal they are fed – no matter how

loud and complicated the programme material.

Soundstage Enhancement Concept allows you

to choose where you want to be positioned

when you listen. This technology means the

soundstage stays intact, wherever you are

positioned.