DAPAudio HP-500 매뉴얼 - 페이지 11

{카테고리_이름} DAPAudio HP-500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio HP-500 20 페이지.

HP-500 / HP-900 / HP-1500 / HP-2100/ HP-3000

D4178: HP-2100

Air exhaust

Do not block the air exhaust as it may cause overheating and/or other serious damage.

IEC power connector IN 230V-50/60Hz

400W/650W/1000W/1300W/1800W

Ground/earth connection

Auto Fuse, 3A, resettable

CH 2, 3-pin XLR connector IN (unbalanced/balanced)

Connect low impedance equipment with balanced/unbalanced line level outputs.

CH 2, Speakon connector OUT

Connect the device to speakers.

Mode switch

With this switch you can choose between the 3 operation modes: bridge, parallel and stereo.



STEREO: 2 inputs (channel 1 and 2) and 2 outputs are used.



PARALLEL: 1 input (channel 1) and 2 outputs are used.



BRIDGE: 1 input (channel 1) and 1 output are used (only use at 8Ohm).

Bridge Speakon connector OUT

Connect the device to speakers in Bridge mode.

CH 1, 3-pin XLR connector IN (unbalanced/balanced)

Connect low impedance equipment with balanced/unbalanced line level outputs.

CH 1, Speakon connector OUT

Connect the device to speakers.

Auto Fuse, 6A, resettable

Auto Fuse, 10A, resettable

Auto Fuse, 15A, resettable

Auto Fuse, 20A, resettable

Ordercode: D4175 / D4176 / D4177 / D4178/D4179

Fig. 09

Fig. 10