DAPAudio IPS-AM 매뉴얼 - 페이지 11

{카테고리_이름} DAPAudio IPS-AM에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio IPS-AM 14 페이지.

Example 1: We want to Link 2 alarms up to each incoming alarm. The DIP switches should be set according

the following diagram.

In case of alarm on channel 14 an alarm will also be sent to channels 15 and 16. The according LED's on the

front panel will also light up red.

Example 2: We want to Link 3 alarms up and 4 alarms down to each incoming alarm. The DIP switches should

be set according the following diagram.

In case of alarm on channel 14 an alarm will also be sent to channels 11, 12, 13, 15, 16, 17 and 18. The

according LED's on the front panel will also light up red.

Serial Linking

If you need to link up more than +/- 4 zones you need a second device. In the example given below, The

system is set up for linking 6 channels up and 3 channels down.