DAPAudio IPS-AS 사용자 설명서 - 페이지 7

{카테고리_이름} DAPAudio IPS-AS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio IPS-AS 12 페이지.

Description of the device

Speaker connector for easy wiring

Four individual channels with M/S amplifier automatic switch

Intelligent fire alarm interface

Four individual channels with M/S amplifier automatic switch

Selectable manual / automatic switch function

Transparant status LED display

Front panel

M/S selector switch

When starting up the system starts up in default mode (main amplifier) If you want to switch to the sub

amplifier press the corresponding M/S selector switch.

Alarm Status Display.

Indicates alarm status for CH1 – CH4. If there is no amplifier connected to the main output or the

amplifier is not functioning, the IPS-AS will switch to the sub amplifier and the corresponding alarm LED

will light up.

3. Volume controls.

Used to control the volume of CH1 – CH4 separately.

4. AC LED

Indicates that AC power is connected and the device is turned on. The LED will dim if the mains

power fails.

5. AC Power Switch.

This is the main Power switch. Press to turn the amplifier on.

6. DC LED.

Indicates that a DC power source is connected. The LED will dim if the DC power source fails.

Auto activating function

Fig. 1