DAPAudio IPS-ISS 매뉴얼 - 페이지 9

{카테고리_이름} DAPAudio IPS-ISS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio IPS-ISS 12 페이지.

Alarm in connection.

The 25-pin D-type connectors are used to input alarm signals.

Pin 1-10 correspond to 10 channels CH1 – CH10.

Pin 11-13 are not connected.

Pin 14-25 is common (GND).

Use the 6.3mm cable to connect the ALARM OUT to REMOTE IN of an emergency alarm generator. As soon

as the Alarm Matrix receives an alarm signal, the ALARM OUT will send an alarm signal to activate the

emergency alarm.

Use only 100V speakers or use low impedance speakers with matching 100V transformers if you're using 100V

amplifiers. If you're using low impedance amplifiers us only low impedance speakers. Never mix them up. If

you're not sure ask a qualified technician.

Fig. 4

Fig. 5