DAPAudio PA-16120 매뉴얼 - 페이지 10

{카테고리_이름} DAPAudio PA-16120에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio PA-16120 20 페이지. Public address amplifier
DAPAudio PA-16120에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

PA-7120

Gain level control – Mic 3

Adjust input level for Mic 3.

Combo input – Mic 3

Combo input for Mic 3. Accepts balanced or unbalanced inputs.

Mic 3 terminal connector IN

Terminal input for Mic 3. Accepts balanced or unbalanced inputs.

Gain level control – Mic 2

Adjust input level for Mic 2.

Combo input – Mic 2

Combo input for Mic 2. Accepts balanced or unbalanced inputs.

Mic 2 terminal connector IN

Terminal input for Mic 2. Accepts balanced or unbalanced inputs.

Mic 1-2 function DIP switches

Moving the DIP

switches to ON/OFF allows you to set up combo inputs 1-2. The available options are:

Speech/Music

•

Line/Mic

•

Phantom

•

PTT

•

Chime

•

Vox

•

Speech/Music: If set to ON, the device will cut off the lower frequencies of the input signal, which will

improve speech audibility. If set to OFF, the low frequencies will not be cut off.

Line/Mic: If set to ON, the input sensitivity will be set for line inputs. If set to OFF, the input sensitivity will

be set for microphone level.

Phantom power: If set to ON, the device will provide power to condenser microphones.

PTT (push to talk): If set to ON, this input will be muted when push to talk contact is open. When push

to talk contact is closed, then this input will be available for speech. Also, chime function will be

audible, if selected. Music and other mic/line inputs will be reduced to the level set with the ducking

level control.

If set to OFF, then the PTT function will be switched off. The signal will be mixed with the other mic/line

signals. Mic 1 will mix with the background music or other microphones in the selected zones.

Chime: If set to ON, chime will be audible at the beginning of an announcement. If set to OFF, chime

will not be audible.

Ordercode: D6151

Fig. 05