DAPAudio Qi-4600 매뉴얼 - 페이지 11

{카테고리_이름} DAPAudio Qi-4600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Qi-4600 16 페이지.

Qi-4200 / 4400 / 4600

Note: To make sure that bridge mode functions properly, you need to connect the speakers only to the

channel 1 and channel 3 outputs.

If you connect the speakers to channel 2 and channel 4 outputs, bridge mode will not function.

Make sure that you have connected the speakers to the appropriate pins. In case of bridge mode,

those are 1+ and 2+. In stereo mode and mono mode (see page 9, fig. 05 and fig. 06) those are 1+

and 1-. Impedance of4Ω or lower is not allowed in bridge mode, as it would cause a short circuit

which would severely damage the amplifier.

Connection Cables

Take care of your cables by always holding them by the connectors and avoiding knots and twists when

coiling them: This gives the advantage of increasing their lifespan and reliability. Periodically check your

cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely

by using unsuitable or faulty cables.

Unbalanced

For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most

professional audio devices. Follow the configuration examples below for your particular connection.

Ordercode: D4530 / D4531 / D4532

Balanced