DAPAudio Vision 1600 매뉴얼 - 페이지 7

{카테고리_이름} DAPAudio Vision 1600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Vision 1600 18 페이지. Vision mkii series high power stereo amplifier
DAPAudio Vision 1600에 대해서도 마찬가지입니다: 제품 설명서 (16 페이지)

페이지 인쇄

Frontpanel

1. "CLIP" Indicator

Any illumination of the clip LED indicates distortion. In this case, check the output signal of your mixer

and turn down the input gain control. Please keep in mind that the power amplifier cannot correct

any distortion.

2. LED "STAND BY"

This indicator lights when you switch your power amplifier on and stays illuminated for a few seconds

(during this time the power amplifier makes an auto-test). When the LED dims, it means the power

amplifier is ready to work.

3. "SIGNAL" Indicator

The illumination of the LED indicates a safe operation.

4. Air vents

Don't obstruct or insert objects into air vents.

5. Channel 1 Volume Control

In stereo mode, this potentiometer allows the adjustment of the channel 1 input level. (left channel ).

In Bridge mode, this potentiometer allows the adjustment of the two channels at the same time.

6. "POWER" Indicator

This indicator lights when the power amplifier is switched on.

Fig. 1