DAPAudio Vision 2400 제품 설명서 - 페이지 7

{카테고리_이름} DAPAudio Vision 2400에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Vision 2400 16 페이지. Vision mkii series high power stereo amplifier
DAPAudio Vision 2400에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지)

페이지 인쇄

Overview

1. Air vents

Don't obstruct or insert objects into air vents.

2. "POWER" Indicator

This indicator lights when the power amplifier is switched on.

3. "CLIP" Indicator

Any illumination of the clip indicates a state of over modulation (distortion at extremely high volumes).

In this case, check the output signal of your mixer and turn down the input gain control. Please keep in

mind that the power amplifier cannot correct any distortion.

4. Channel 1 Volume Control

In stereo mode, this potentiometer allows the adjustment of the channel 1 input level. (left channel ).

In Bridge mode, this potentiometer allows the adjustment of the two channels at the same time.

5. "PROTECTION" Indicator

When this indicator lights, the power amplifier is in protection mode. Switch off the device and find out

what the problem is. The power amplifier is protected against overheat, overload, short circuit, DC,

Soft-start.