DAPAudio Vision 2400 매뉴얼 - 페이지 6

{카테고리_이름} DAPAudio Vision 2400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Vision 2400 18 페이지. Vision mkii series high power stereo amplifier
DAPAudio Vision 2400에 대해서도 마찬가지입니다: 제품 설명서 (16 페이지)

페이지 인쇄

Description of the device

Features

The Vision 1600, 2400 and 3500 are professional high-end amplifiers :

Vision 1600

• 2x Channel in and Link out

• 2x Speakon out

• Built-in Clip Limiter

• Switch-able entrance sensitivity: 0.775V, 1V and 1.4V

• Bridge, parallel or stereo mode

• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.

• Ground-selector

• Back to front airflow

• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier

has to be restarted by pushing the ON/OFF switch again. On and off switching eventually happens

with relay.

Vision 2400

• This amplifier is primarily secured on 15A

• 2x Channel in and Link out

• 2x Speakon out and 2x binding- post out

• Selectable Clip Limiter

• Selectable input sensitivity: 0.775V, 1V and 1.4V

• Bridge, parallel or stereo mode

• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.

• Ground-selector

• Selectable crossover, Low-pass, 150 Hz, 18 dB/oct.

• Back to front airflow

• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier

has to be restarted by pushing the ON/OFF switch again. On and off switching eventually happens with

relay.

Vision 3500

• This amplifier is primarily secured on 18A

• 2x Channel in and Link out

• 2x Speakon out and 2x binding- post out

• Selectable Clip Limiter

• Selectable input sensitivity: 0.775V, 1V and 1.4V

• Bridge, parallel or stereo mode

• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.

• Ground-selector

• Selectable crossover, Low-pass, 150 Hz, 18 dB/oct.

• Back to front airflow

• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier

has to be restarted by pushing the ON/OFF switch again. On and off switching eventually happens

with relay.