DAPAudio Vision 2400 ORDERCODE D4152 매뉴얼 - 페이지 8
{카테고리_이름} DAPAudio Vision 2400 ORDERCODE D4152에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Vision 2400 ORDERCODE D4152 18 페이지. Vision mkii series high power stereo amplifier
페이지 인쇄
7. Power Switch
Use this switch to switch your power amplifier on.
8. "PROTECTION" Indicator
When this indicator lights, the power amplifier is in protection mode. Switch off the device and find
out what the problem is. The power amplifier is protected against overheat, overload, short circuit,
DC, soft-start.
9. Channel 2 Volume Control
In stereo mode, this potentiometer allows the adjustment of the channel 2 input level. (Right channel)
In bridge mode, this potentiometer is disabled.
10. Handles
Handles are used for easy transportation.
Backpanel:
11. Channel 1 XLR Input
This XLR input is a balanced input. Connect this input to the left output of your mixer.
12. Channel 1 Link Socket
This balanced socket is used to link another amplifier.
13. Input Sensitivity Selector
This selector allows you, to select the input sensitivity: 0.775V, 1.0V or 1.4V.
14. Bridge LED
This LED lights if the amplifier is in bridge mode.
6
Fig.2