Addonics Technologies UDFH7 사용자 설명서 - 페이지 8

{카테고리_이름} Addonics Technologies UDFH7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies UDFH7 8 페이지. 1:7 usb hdd / flash duplicator

7.6. Asynchronous

Enables or disables Asynchronous Mode during the copy function. When

enabled, the Copy, Compare, and Copy+Compare functions will work as

described by the Quick Start section of this User Guide. When disabled,

the Copy, Compare, and Copy+Compare functions will work as described

in the Quick Start section of this User Guide in Direct Mode only.

Default is "Enable."

7.7. Check Before Copy

Enables or disables testing target media before proceeding with the Copy

function.

Default is "Do Check" (enabled).

7.8. Power Off Time Between Copy+Compare

Determines the delay in seconds between the Copy and Compare func-

tions during Main Menu function 3. Copy+Compare.

Default is 3 (seconds).

7.9. Language

Sets the language used by the firmware's LCD display. Choices are

English or Japanese.

Default is English.

7.10. Working Mode

Determines the approximate rate at which the Duplicator will attempt to

copy media. Faster settings may shorten copy time but result in higher

failure rates, slower settings will cause the process to take longer but will

improve the reliability of the copy.

Default is "Normal Mode." Choices are: Slowest, Slower, Normal, Faster,

Fastest.

7.11. Set HDD Mode

When enabled, all target devices will be required to be equal to or greater

than the capacity of the source, overriding "LOW Limit" tolerance settings

(see 7.5. Target Tolerance).

7.12. Restore Default

Returns all settings to their factory default values.

www.addonics.com

Phone:

Fax:

Email:

408-573-8580

408-573-8588

http://www.addonics.com/sales/query/