DAPAudio Xtreme X-2000 제품 설명서 - 페이지 9

{카테고리_이름} DAPAudio Xtreme X-2000에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Xtreme X-2000 15 페이지. Amplifier with digital audio processor

ONLINE MODE

1. Connect the amplifier to the PC with the right cable. Insert one end of the cable into the parallel port of

PC and the other end into the PC REMOTE port in the front panel of amplifier.

Start DSP testing software.

2. CONNECTION

Click the Debug button and then click Connect. Select a device number (1-255). If this number is the

same as the amplifier ID, the LCD shows:

At that time, the system can be tested by the DSP software. All the functions from the offline mode are not valid.

3. DISCONNECT

Click Debug button and then click Disconnect, the LCD shows:

Then the software testing is not valid. The system returns to the offline mode.

Regarding the operation of DSP software, please refer to the online help of it.

CONNECT SUCCESSFUL

PC CONTROL DEVICE

CONNECT CANCEL

MCU CONTROL DEVICE

the

Fig. 3