DAPAudio Xtreme X-700 제품 설명서 - 페이지 6

{카테고리_이름} DAPAudio Xtreme X-700에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Xtreme X-700 15 페이지. Amplifier with digital audio processor

Description of the device

The Xtreme X-700, X-900, X-1300, X-2000, X-2400 are professional high-end amplifiers :

• Integrated system

• Perfect electronic protections: short circuit/overload protection, overheating Protection and direct current

excursion protection.

• Network control

• Power supply

• Built-in 48-bit DSP processor and dynamic range up to 116 dB, 48kHz sampling rate A/D, D/A

• Low noise and lower distortion

• Well-designed signal generator: sin wave and white noise

• S/PDIF input/output (option)

• Matrix control, up to 255 units controlled by selecting address code

• Save and recall all parameters via PC parallel port

• 5 band PEQ, limiter threshold, attack time and release time adjusted), delay (max 8ms), phase invert, input

gain control

• Two crossover: range, 20Hz-20kHz. Crossover frequency adjusted. Slope: -6, -12, -18 and -24dB

butterworth

• Three output modes: stereo, mono and bridge

• THD+N: 0,08%@ I kHz

• Frequency response: 20Hz-20kHz

• 2 x 20 LCD display with backlit

Overview

1. CH A: Adjust the volume of channel A / Set up amplifier ID device nr1-255 / Noise Gate ON/OFF

2. CH B: Adjust the volume of channel B / Load Program 1-11 / Auto Mute ON/OFF

3. Input interface to PC

4. Output interface to PC

5. 2 x 20 LCD Display with backlit

6. Power ON/OFF

X-700: RMS 2 X 750 W(4 ), RMS 2 X 430W(8 )

X-900: RMS 2 X 870 W(4 ), RMS 2 X 5 20 W( 8 )

X-1300: RMS 2 X 1050W[4 ), RMS 2 X 7 2 0 W ( 8 )

X-2000: RMS 2 X 1520W[4 ), RMS 2 X 1020W(8 )

X-2400: RMS 2 X 1760W[4 ), RMS 2 X 1250W[8 )

Fig. 1