DAPAudio Compact 6.2 D2320 매뉴얼 - 페이지 6
{카테고리_이름} DAPAudio Compact 6.2 D2320에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Compact 6.2 D2320 16 페이지.
페이지 인쇄
Compact 6.2
Description of the device
Features
6 Channel 1U mixer/USB player
The Compact 6.2 is the ideal mixer for sports instructors. It is equipped with 2 microphone inputs with built-
in compressor limiters and high-pass filters. This will help the instructor to keep perfect intelligibility, as the
dynamic range will be extended and distortion will be eliminated. The device has one selector to choose
the audio source with. The available sources include: the internal USB/MP3 player, the front input or 2 line
inputs at the rear panel. The MP3 player supports ID3 texts and can be pitched, which is ideal for fitness,
spinning and all kinds of group workouts. The front input can be used for a normal line level but also can
be switched to a special phone mode which adjusts the input sensitivity to the correct value for MP3
players, smartphones or tablets. You can now use your MP3 devices directly without signal loss. There are
2 master outputs with separate, lockable volume controls and a separate monitor volume especially for
the instructor. All technical settings like EQ, Gain, Phantom Power, Compression & Threshold are on the
rear side of the unit. Now, the instructor only has to set his source and mic level and does not need to
worry about the other settings. The Compact 6.2 is an all-in-one solution for your sports instructor. It is easy
in use and has all features which are needed to give instructions, without worrying about anything else
but the audience.
Mic input with Comp/Limit
USB player with pitch control
Display with ID3 text
Direct MP3/phone input
2 masters & monitor outputs
Frontside
Mic 1 combo input connector
Electronically balanced combo-type input for connecting low impedance microphones. The input
has extremely low noise and hum. When connecting a microphone, make sure that the pin
assignment is correct. Always make sure to read the manual of the microphone you want to
connect. Use only one connector at a time: (01) or (36).
Input VU-meter (Mic 1–2)/Compressor
This meter is a multi-step LED. The green LEDs allow you to monitor the input microphone signal level
and make it match the other devices. The red LEDs allow you to monitor the relationship of the input
signal level to the threshold of compression.
Mic Volume control (Mic 1–2)
Turn the control to set the volume of the corresponding microphone channel.
Level control (Stereo Input)
Controls the volume of the input channel.
Input source switch
Turn the control to select the desired signal source. Choose from the USB, line input 1 & 2 (33,34),
and the front aux input (20).
Ordercode: D2320
5
Fig. 01